The Alien 220W Starter Kit from Smok is simply out of this world. You will get a lot of clouds and excellent flavor from this vape kit. You do not have to be an advanced vaper to enjoy using the Smok Alien 220W Kit. If you an intermediate level vaper and you are looking for a powerful vaping setup, this is an excellent choice. This vape kit from Smok has superior performance. You can easily make this your go-to vaporizer, and it will not disappoint.

The Alien 220W Kit has some of the best features of Smok Mods including the large firing button and clear OLED screen on the side. This kit is composed of the Alien 220W box mod and the Baby Beast tank from Smok. It comes in different attractive colors like gunmetal, black/red, champagne, silver/black, orange, white/red, purple/black, green, lake blue, blue, pearl white, and many other colors. This vape kit is going for over $80 on most online vape stores. But you can get it on Ejuice Deals for only $56.

Alien 220W Mod

The Smok Alien 220W Mod has a dimension of 85mm by 44mm by 3mm. It can fit most atomizers on the market with a diameter of 24mm and below. You can use a 25mm tank on this mod. However, there would be a slight overhang.

The Smok Alien 220W mod runs on dual 18650 batteries. The battery compartment is located at the bottom of the mod. You will find some ventilation holes on both sides of the top area of the mod to avoid battery overheating. The package includes a micro USB charger for charging the mod and upgrading its firmware. You will find the micro USB port on the side of the mod underneath the screen. When upgrading the firmware of this mod, you need to check which version it is. There are two versions of the Alien 220W mod. One edition displays V1.2.11 and the other version displays as VB1.0.2. Ensure the firmware you download and install is the correct one for your mod or it may not work properly.

This mod has the characteristic large and stealth firing button that you will find on other Smok mods. There is a big OLED screen on the side of the mod that displays your vaping data such as voltage, mode, battery life, resistance, and more. This mod has different modes like wattage, temperature control, TCR, and memory mode. In wattage mode, the resistance range of the mod is 0.1ohm to 3ohm. In temperature control mode, the resistance range of 0.6ohm to 3ohm. You can use stainless steel, titanium, and nickel coils in temperature control mode. It has a temperature range of 200 to 600 degrees Fahrenheit.

Baby Beast Tank

The Baby Beast Tank is arguably one of the best tanks from Smok. It has a very nice design with colorful o-rings that add a nice touch to its appearance. The tank has a removable drip tip. You can use any standard 510 Delrin drip tip on this tank. It has a top fill design. To fill the tank, you simply need to slide the top cap to access the fill hole. The tank can hold 3ml of e-juice. There is a European version of this tank that has a capacity to hold only 2ml of e-liquid. The tank comes with an extra glass tube so you can replace the one it comes with if it gets broken.

It is pretty straightforward to change the coil heads of this atomizer. The tank comes pre-installed with a 0.4ohm dual coil head. You will find a 0.15ogm octuple coil head in the package. The tank has adjustable airflow slots. To adjust the airflow slots, you need to turn a ring above it. There is a non—adjustable 510 connection pin for attaching it to your mod.

LEAVE A REPLY

Please enter your comment!
Please enter your name here